landford stone logo


Share this page

Follow us on Facebook

Sinks & Taps

1810 Sinks & TapsLandford Stone provide a full range of sinks and taps from The 1810 Company. The 1810 Company are leading the way for new designs and technology when it comes down to sinks and taps. Currently the only company that offer a curved sink and a three bowl sink.

The 1810 philosophy is to supply innovative and contemporary European design in a wide range of standard and more unique size combinations, appealing to those who appreciate superior quality and style.

INSUSOUND 1810 sinks are all treated on the underside with a protective powder coating, which they call ‘Insusound’ This will help retain the heat of the water in the bowl and dramatically reduce noise when filling a waste disposal unit. (Available on the Zen and Etro ranges only).

All of 1810 taps are supplied with a Neoperl Aerator which provides a non splash, even, consistent creamy flow. With all under mounted sinks purchased you will receive a MAXIMISER PLUMBING KIT as standard.

If you have still not found what you’re looking for then please see the full range.


Care & Cleaning:

What is a WRAS Approval?

wras-logoAny water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws.  These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’.

WRAS Approval is the easiest way to demonstrate compliance as it is granted directly by representatives of the water suppliers and is therefore accepted by every water supplier in the UK.

WRAS Product Approval

Whole products such as valves, boilers & showers undergo mechanical and water quality testing. This type of approval demonstrates full compliance with requirements of the regulations and byelaws, provided the fitting is installed according to any conditions given with the approval.

WRAS Material Approval

Non-metallic materials & components, such as rubber sheet material & ‘O’ rings, undergo testing only for their effects on water quality.  This type of approval demonstrates that the non-metallic material/component does not itself contaminate the water and therefore satisfies this particular requirement of regulations and byelaws.

Where do the regulations apply?

The Regulations are typically in effect between the boundary of a property and the point of discharge as illustrated below.

Send this to friend